
Rain Master Irrigation Systems DX2 User Manual
Page 218 Chapter 10: Troubleshooting
Ref. Manual Station (8-12)
Manually operate the known working station (STA 1) for
one minute.
Is a master
valve or pump required to be
turned on for the station to
operate?
Is the MV
and/or pump light on?
No
Yes
Yes
6
8
9
Isolate problem to field wiring/valve solenoid or controller
as follows:
Example: Station 1 works fine
Station 2 no water
At the station output board, inter-change the station wires
of the defective station (STA 4) with a known working
station (STA 1).
B
Refer to master
valve/pump setup (4-
13)
Set up program where
station
No
Komentáře k této Příručce