Evolution FURY Manuál s instrukcemi stáhnout pdf (Strana 16)

www.evolutionfury.com

TO CONFIGURE THE FURY6 FOR USE AS

A MITRE SAW

WARNING: Only carry out this procedure

with the machine disconnected from the

power source.

Caution: The Fury6 has many built in safety

features and safety interlocks. It is important

that the following instructions, and those

found on the label attached to the machine

table are read, understood and acted

upon. Failure to carry out the conﬁguration

procedure could result in damage to the

machine and/or injury to the operator.

• Loosenthetableheightadjustment

screw. (Fig.4)

• Raisethetabletoptoitsupmostposition

and tighten the height adjustment screw.

(Fig. 5)

• SlightlypushdownontheCuttingHead

Handle.

• PullouttheCuttingHeadLatchingPin

and allow the Cutting Head to rise to its

upmost position. (Fig. 6)

• RemovetheAuxiliaryLowerBladeGuard

and store safely for future use.

The Fury6 is now ready to use as a

Mitre Saw. (Fig. 7)

Fig. 7

Fig. 4

Fig. 5

Fig. 6

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Žádné komentáře

Evolution FURY Manuál s instrukcemi Strana 16